Topring PPS Compressed Air Piping System

The Toping PPS compressed air piping system is lightweight, corrosion resistance, and made out of 100% aluminum. Quick and easy to install, the system can be immediately pressurized right after installation. Available in sizes from 16mm all the way to 80mm, with nationwide CRN certifications to match, Topring is your best choice for an aluminum air system that ensures the highest quality of safety and quality.

The Topring PPS advantage:

  • 100% aluminum solution for clean, top quality air supply
  • Leak tight air network and optimized flow rate
  • Sizing selection from 16mm to 80mm
  • One assembly connection technology for all sizes
  • Maximum working pressure of 232 PSI
  • CRN approved across Canada


Canadian Registration Number (CRN)

All series 08 Topring PPS pipes, fittings, and ball valves are CRN approved for all Canadian provinces.

ISO 9001.2008

08 Topring PPS are manufactured according to ISO management system standards.


The QUALICOAT certification is a guarantee of the quality of the lacquer finish applied to aluminum pipes. This standard is met with Topring 08 PPS.

ASME B31.1 and ASME B31.3

The above standards prescribe requirements for material, components, design, fabrication, assembly, construction, examination, inspection, and testing of piping. This standard is met with Topring 08  PPS.


A TUV certified product is a pledge of safety and quality. It complies with the pressure equipment directive PED 2014/68/EU. The TUV seal confirms independent test results, in particular the properties of the products and the standards under which they were examined.

UL Fire Rating

All products of the 08 Topring PPS  meet the standard for the fire rating of construction products and components (UL 94).

REACH Standard

A REACH certified product meets the guidelines for registration, evaluation, authorization, and restriction of chemicals. 08 Topring PPS meets this standard.


The Topring compressed air piping system is easy and quick to instal with minimal tools required. The pipes and fittings can be installed much quicker then standard systems because all components are calibrated to fit together. All components are removable and interchangeable, which makes future modifications very easy.


  • Four to five times quicker to install then steel
  • Significantly lighter and easier to install
  • Corrosion resistant
  • Little effort to cut the pipes
  • Only one installer required (for small pipe dimensions)
  • Low maintenance costs

Pressure and Temperature Ranges

  • Maximum working pressure: 232 PSIG
  • Maximum vacuum: 29.84 HG / -0.98 BAR
  • Working temperature: -20 to 80C

 CFM provides a no charge design and consultation on all Topring piping installations. We work with you on a design to make sure that all of your air requirements are met. Once the design is agreed upon, our service team will then come and work their magic and get your installation done in and efficient and timely manner. Once we are done, we guarantee you will have an leak free compressed air distribution system.

Also, if you want to install the pipe yourself…no problem. We will work with you on a design that works for you and provide all the parts required. We will even come show you how to properly install it.

Brochure Links

PPC Compressed Air Systems Installation Guide

PPC Compressed Air Systems Installation Guide



# 9, 1201 Grassmere Rd
West St Paul, MB, R4A 1C4
Phone: 204-237-4247
Toll Free: 877-323-7247

Contact Us